As human being became more civilized, the availability of processed goods increased. The prices also started dropping as more people got into the trade. This led to increased consumption of the foods rich in processed sugar. This coupled with poor oral hygiene leads to tooth decay that is caused by several factors working together. The damage caused by decay might be too much to necessitate tooth removal. After, the offending tooth has been extracted, one may consider to have it replaced using dental implants falls church va.
Dental implants are root devices that are manufactured and used to replace missing teeth in the mouth. They are installed inside of bone and allowed to bond to the surrounding tissues. It is a good option to consider when replacing one tooth. This is because the adjacent teeth are not involved and thus remain untouched in their natural form.
Posts can be used to anchor a complete denture to the jaw bone so as to prevent it from coming off unnecessarily. The lower complete dentures are more commonly supported with implants since the lower alveolar bone does not provide good support for the dentures. This is caused by bone loss as one ages.
Before a root post is put into the mouth for replacing a missing tooth, some assessment must be done. This is to ensure that the treatment will be successful. Some of it is done through asking questions about the health condition of the patient. Another form of assessment is done through visually examining the oral tissues. Some assessment is also done by feeling the gums and bone by hand. It may also be necessary to use radiography for further assessment of the makeup of the bone.
All costs to be charged should be explained to the client. The dentist will only begin work if he is sure that he will be paid.
The post used will depend on the results that the doctor wants to achieve as well as the customer's ability to pay. Different posts are manufactured and vary depending on the material used to make them as well as their form. The surface of different posts also differs.
The actual treatment is done by first raising a flap. When the bone has been exposed, a dental drill is used to make a hole into which the implant will fit. The hole is enlarged in a stepwise manner until it is the right size. The drill should be supplied with water at a constant rate so that heat generated during drilling doesn't damage bone.
When an adequate hole has been made, the post is put in it and covered with some soft tissue. It is then allowed some time for healing to take place. When properly healed, a tooth or denture is attached to the post. One advantage of using a post is that the tooth can be replaced if it gets damaged and the same post will be used in repair.
Dental implants are root devices that are manufactured and used to replace missing teeth in the mouth. They are installed inside of bone and allowed to bond to the surrounding tissues. It is a good option to consider when replacing one tooth. This is because the adjacent teeth are not involved and thus remain untouched in their natural form.
Posts can be used to anchor a complete denture to the jaw bone so as to prevent it from coming off unnecessarily. The lower complete dentures are more commonly supported with implants since the lower alveolar bone does not provide good support for the dentures. This is caused by bone loss as one ages.
Before a root post is put into the mouth for replacing a missing tooth, some assessment must be done. This is to ensure that the treatment will be successful. Some of it is done through asking questions about the health condition of the patient. Another form of assessment is done through visually examining the oral tissues. Some assessment is also done by feeling the gums and bone by hand. It may also be necessary to use radiography for further assessment of the makeup of the bone.
All costs to be charged should be explained to the client. The dentist will only begin work if he is sure that he will be paid.
The post used will depend on the results that the doctor wants to achieve as well as the customer's ability to pay. Different posts are manufactured and vary depending on the material used to make them as well as their form. The surface of different posts also differs.
The actual treatment is done by first raising a flap. When the bone has been exposed, a dental drill is used to make a hole into which the implant will fit. The hole is enlarged in a stepwise manner until it is the right size. The drill should be supplied with water at a constant rate so that heat generated during drilling doesn't damage bone.
When an adequate hole has been made, the post is put in it and covered with some soft tissue. It is then allowed some time for healing to take place. When properly healed, a tooth or denture is attached to the post. One advantage of using a post is that the tooth can be replaced if it gets damaged and the same post will be used in repair.
Aucun commentaire:
Enregistrer un commentaire